Actual Signals; Settings; Diagnostics - ABB ACS800 Firmware Manual

Actual signals

Several actual signals are available:
• Drive output frequency, current, voltage and power
• Motor speed and torque
• Mains voltage and intermediate circuit DC voltage
• Active control location (Local, EXT1 or EXT2)
• Reference values
• Drive temperature
• Operating time counter (h), kWh counter
• Digital I/O and Analogue I/O status
Three signals can be shown simultaneously on the control panel display. It is also
possible to read the values through the serial communication link or through the
analogue outputs.

Settings

Parameter
Group
OUTPUTS
Group
ADDR

Diagnostics

Actual signal
Group
SIGNALS
ACTUAL SIGNALS
Additional information
15 ANALOGUE Selection of an actual signal to an analogue output
92 D SET TR Selection of an actual signal to a data set (serial communication)
Additional information
01 ACTUAL Lists of actual signals
... 09
65
Program features