Control Panel; Chapter Overview; Overview Of The Panel - ABB ACS800 Firmware Manual

Control panel

Chapter overview

The chapter describes how to use the control panel CDP 312R.
The same control panel is used with all ACS800 series drives, so the instructions
given apply to all ACS800 types.

Overview of the panel

SPEED
CURRENT
TORQUE
1 L -> 1242.0 rpm I
1500.0 rpm
80.00 A
75.00 %
ACT PAR FUNC DRIVE
ENTER
7 6 3 1
LOC RESET REF
REM
I 0
4 5 2
The LCD type display has 4 lines of 20 characters.
The language is selected at start-up (parameter 99.01).
The control panel has four operation modes:
- Actual Signal Display Mode (ACT key)
- Parameter Mode (PAR key)
- Function Mode (FUNC key)
- Drive Selection Mode (DRIVE key)
The use of single arrow keys, double arrow keys and
ENTER depend on the operation mode of the panel.
The drive control keys are:
No. Use
1 Start
2 Stop
3 Activate reference setting
4 Forward direction of rotation
5 Reverse direction of rotation
6 Fault reset
7 Change between Local / Remote (external)
control
For more information, see
and displays on page 38 and
the drive status at a glance
Panel operation mode keys
Status row – How to read
on page 39.
Control panel
37