Drive Control With The Panel; How To Start, Stop And Change Direction - ABB ACS800 Firmware Manual

40

Drive control with the panel

You can control the drive with the panel as follows:
• start, stop, and change direction of the motor
• give the motor speed reference or torque reference
• reset the fault and warning messages
• change between local and external drive control.
The panel can be used for control of the drive control always when the drive is under
local control and the status row is visible on the display.

How to start, stop and change direction

Step Action
1. To show the status row.
2. To switch to local control.
(only if the drive is not under local control, that is, there is
no L on the first row of the display.)
3. To stop
4. To start
5. To change the direction to reverse.
6. To change the direction to forward.
Control panel
Press Key Display
1
ACT PAR
FREQ
CURRENT
FUNC
POWER
1 L ->1242.0 rpm
LOC
FREQ
REM
CURRENT
POWER
1 L ->1242.0 rpm
FREQ
CURRENT
POWER
1 L ->1242.0 rpm
FREQ
CURRENT
POWER
1 L <-1242.0 rpm
0
FREQ
CURRENT
POWER
1 L ->1242.0 rpm
I
FREQ
CURRENT
POWER
->1242.0 rpm I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
O
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %
I
45.00 Hz
80.00 A
75.00 %