Status Row - How To Read The Drive Status At A Glance - ABB ACS800 Firmware Manual

Status row – How to read the drive status at a glance
The top line of the LCD display shows the basic status information of the drive.
1 L -> 1242.0 rpm I
SPEED 1500.0 rpm
CURRENT 80.00 A
TORQUE 75.00 %
Drive ID number
Drive control status
L = Local control
R = Remote control
" " = External control
The figure below describes the status row digits.
1 L -> 1242.0 rpm I
Direction of rotation Drive reference
->
= Forward
<-
= Reverse
Drive status
I = Motor is running.
O = Motor is stopped, ready for
new start.
" " = ACS800 is not ready for
start (fault or any interlock open).
Control panel
39