Introduction To The Manual; Chapter Overview; Compatibility; Safety Instructions - ABB ACS800 Firmware Manual

Introduction to the manual

Chapter overview

The chapter includes a description of the contents of the manual. In addition, it
contains information about the compatibility, safety, intended audience, and related
publications.

Compatibility

The manual is compatible with ACS800 Crane control program (+N697) version
AQCR7XXX. This software supports the RMIO-01/02 and RMIO-11/12 Motor and I/O
Control Boards. See parameter
The Crane control program version AQCR7xxxx is also compatible with the ACS800
Anti-sway control program version A9XRxxx. For more information, see ACS800
Anti-sway Control Program (+N816) Supplement (3AUA0000094750 [English]).
With the DriveWindow PC tool version 2.xx, it is possible create a full back-up of the
software (*.bpg file). You can use the back-up file, for example, when replacing the
RMIO-xx board or a whole drive.

Safety instructions

Follow all safety instructions delivered with the drive.
• Read the complete safety instructions before you install, commission, or use
the drive. The complete safety instructions are given at the beginning of the
relevant hardware manual.
• Read the software-function-specific warnings and notes before changing the
default settings of the function. For each function, the warnings and notes are
given in this manual in the section describing the related user-adjustable
parameters.

Reader

The reader of the manual is expected to know the standard electrical wiring
practices, electronic components, and electrical schematic symbols.
33.01 SOFTWARE VERSION.
15