ABB ACS800 Firmware Manual page 221

Index Name/Selection
RRIA-DDCS
RTAC03-SLOT1
RTAC03-SLOT2
RTAC03-DDCS
98.02 COMM. MODULE
LINK
NO
FIELDBUS
ADVANT
STD MODBUS
98.03 DI/O EXT MODULE 1 Activates the communication to the digital I/O extension module 1 (optional)
NO
RDIO-SLOT1
RDIO-SLOT2
RDIO-DDCS
98.04 DI/O EXT MODULE 2 Activates the communication to the digital I/O extension module 2 (optional)
NO
RDIO-SLOT1
RDIO-SLOT2
RDIO-DDCS
Description
Communication active. Module type: RRIA. Connection interface: Optional I/O
module adapter (AIMA) that communicates with the drive through a fibre optic
DDCS link.
Communication active. Module type: RTAC03. Connection interface: Option
Slot 1 of the drive.
Communication active. Module type: RTAC03. Connection interface: Option
Slot 2 of the drive.
Communication active. Module type: RTAC03. Connection interface: Optional
I/O module adapter (AIMA) that communicates with the drive through a fibre
optic DDCS link.
Activates the external serial communication and selects the interface. See
chapter Fieldbus control.
No communication
The drive communicates via a fieldbus adapter module in option slot 1 of the
drive, or via CH0 on the RDCO board. See also parameter group
MODULE DATA.
The drive communicates with an ABB Advant OCS system via CH0 on the
RDCO board (optional). See also parameter group
The drive communicates with a Modbus controller via the Modbus Adapter
Module (RMBA) in option slot 1 of the drive. See also parameter
STANDARD MODBUS.
and defines the type and connection interface of the module.
Module outputs: See parameters
that are indicated through the relay outputs.
Inactive
Communication active. Module type: RDIO. Connection interface: Option slot 1
of the drive.
Communication active. Module type: RDIO. Connection interface: Option slot 2
of the drive.
Communication active. Module type: RDIO. Connection interface: Optional I/O
module adapter (AIMA) that communicates with the drive through a fibre optic
DDCS link.
Note: Module node number must be set to 2. For directions, see RDIO Module
User's Manual [3AFE64485733 (English)].
and defines the type and connection interface of the module.
Module outputs: See parameters
that are indicated through the relay outputs.
Inactive
Communication active. Module type: RDIO. Connection interface: Option slot 1
of the drive.
Communication active. Module type: RDIO. Connection interface: Option slot 2
of the drive.
Communication active. Module type: RDIO. Connection interface: Optional I/O
module adapter (AIMA) that communicates with the drive through a fibre optic
DDCS link.
Note: Module node number must be set to 3. For directions, see RDIO Module
User's Manual [3AFE64485733 (English)].
70 DDCS
14.10 and 14.11 for selecting the drive states
14.12 and 14.13 for selecting the drive states
Actual signals and parameters
221
FbEq
7
8
9
10
1
2
51 COMM
3
CONTROL.
4
52
1
2
3
4
1
2
3
4