Setting Port Parameters; Setting Port Mapping - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide

7.9 Setting Port Parameters

Set the HTTP port, HTTPS port, and Real-Time Streaming Protocol (RTSP) port of the
device.
Procedure
Step 1 Choose Settings > Network Configuration > Port Parameters.
The Port Parameters page is displayed, as shown in
Figure 7-18 Port Parameters page
Step 2 Enter an integer ranging from 1 to 65535 in the text boxes of HTTP port, HTTP port, and
RTSP port.
Step 3 Click Save.
----End

7.10 Setting Port Mapping

After NAT environment is configured, map devices in the internal NAT network to ports
(including the HTTP, HTTPS, and RTSP ports) of the extranet.
Procedure
Step 1 Choose Settings > Network Configuration > Port Mapping.
The Port Mapping page is displayed, as shown in
Figure 7-19 Port Mapping page
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Setting Network Parameters
Figure 7-18.
Figure 7-19.
89