IPC6125-WDL-FA
Configuration Guide
12.4 Configuring Snapshot Upload
This topic describes how to configure the server to which snapshots are to be uploaded.
Procedure
Step 1 Choose Setting > Capture Manager > Capture Configure.
Step 2 In the Upload Parameters area shown in
according to
Figure 12-4 Upload Parameters area
Table 12-2 Snapshot upload parameters
Parameter
Snap retransmission
Enable
Upload Protocol
Issue 01 (2016-08-20)
Table
12-2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
12-4, set snapshot upload parameters
Note
Enables snapshots that fail to be uploaded
due to a fault (for example, network
disconnection) to be re-transmitted to the
server after the fault is rectified.
Enables snapshots to be uploaded to the
server as configured.
Indicates the protocol used for uploading
snapshots.
l SFTP: Secure File Transfer Protocol,
which is a secure protocol for encrypting
file transfer.
l FTP: File Transfer Protocol.
NOTE
SFTP is recommended as FTP may bring
security risks.
12 Configuring the Snapshot
153