Huawei IPC6125-WDL-FA Configuration Manual page 36

IPC6125-WDL-FA
Configuration Guide
The time calibration modes include Manual Time Sync and NTP. Manual Time Sync indicates that you can
directly set the camera time. NTP indicates that the camera can be time-synchronized with the NTP server in
the network. The two modes cannot be configured at the same time.
Table 3-7 Selecting a time calibration mode
Parameter
Manual Time Sync
NTP
Step 3 Click Save.
Step 4 Configure the DST,as shown in
Figure 3-10 Time Configuration tab page
a.Select the mode for setting the DST.
b.Select Enable DST.
c.Set Start time, End time, and Offset time of the DST based on regulations specified in the
local laws.
For detailed parameter description,
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
1. Select Manual Time Sync.
2. Click the Time text box.
The dialog box for setting the date and time is displayed.
3. Set the date and time and click OK.
The system returns to the time setting page.
NOTE
To time-synchronize the camera with the PC, click Today.
1. Select NTP.
2. Set the NTP server IP address or domain name as prompted
and set the interval for time-synchronizing the camera with
the NTP server.
Figure 3-10.
seeTable 3-8.
3 Setting Basic Parameters
30