Configuring Snmp V3 User Information - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Step 4 Click OK.
The SNMP Parameters page is displayed.
Step 5 Click Save.
----End

7.7.3 Configuring SNMP v3 User Information

When SNMP v3 is used, the NMS visits the IPC using a user account in secure access mode.
Different user accounts have different access rights.
Context
When SNMP v3 is used, you can configure a maximum of three SNMP v3 users. This section
mainly describes how to add a new SNMP v3 user.
Procedure
Step 1 Choose Settings > Network Configuration > SNMP Parameters.
The SNMP Parameters page is displayed, as shown in
Figure 7-15 SNMP Parameters page
Step 2 Click Add in the SNMP v3 user information area.
The page for configuring SNMP v3 user information is displayed, as shown in
Figure 7-16 Configuring SNMP v3 user information
Step 3 Set parameters. For detailed parameter description, see
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Setting Network Parameters
Figure 7-15.
Table 7-4.
Figure 7-16.
86