Setting Temperature Alarm Parameters; Setting Alarm Deployment Policy Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Parameter
Step 3 Click Save.
----End

10.2 Setting Temperature Alarm Parameters

When the IPC operating temperature is out of a specific range (-20°C to +60°C), a
temperature alarm is generated.
Procedure
Step 1 Choose Settings > Alarm Configuration > Temperature Alarm.
The page for setting temperature alarm parameters is displayed, as shown in
Figure 10-2 Temperature alarm tab page
Step 2 Select Enable.
Step 3 Set Alarm check interval.
Reference temperature indicates the reference temperature of the current device environment. To update the
reference temperature, click the Temperature Alarm tab again.
Step 4 Click Save.
----End

10.3 Setting Alarm Deployment Policy Parameters

You can specify an alarm deployment policy for the IPC, that is, specify a time segment for
receiving specified alarms. If the IPC is not configured with any alarm deployment policy, no
alarm is generated.
Context
An alarm deployment policy includes device alarm deployment and alarm deployment plan.
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Duration
10 Setting Alarm Parameters
Description
Duration of the alarm.
NOTE
If Duration is set to 0, the
alarm persists permanently.
Figure 10-2.
140