The Https Web Page Cannot Be Displayed On Internet Explorer; Cannot Open The Device Web Page After Setting The Web Server Protocol To Https - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Solution
Reinstall the ActiveX control.
1.
2.
3.
4.
5.
6.
Reinstall Internet Explorer, depending on Internet Explorer you are using.
15.1.8 The HTTPS Web Page Cannot be Displayed On Internet
Explorer
Symptom

The HTTPS web page cannot be displayed on Internet Explorer.

Possible Cause
This problem is caused by the settings of Internet Explorer.
Solution
Open Internet Explorer, choose Tools > Internet Options > Advanced and deselect the Use
SSL 2.0 under Security.
15.1.9 Cannot Open The Device Web Page After Setting The Web
Server Protocol To HTTPS
Symptom
After you set the web server protocol to HTTPS, you cannot open the device web page.
Possible Cause
The device is incompatible with the HTTPS certificate.
Solution
Restore the settings except for the IP settings.
1.
Issue 01 (2016-08-20)
Open Internet Explorer, choose Tools > Internet Options > Advanced, click Reset to
reset Internet Explorer, and close all Internet Explorer windows.
Choose Start > Run, enter CMD, and press Enter to display the DOS window.
Enter regsvr32 -u and drag the C:\Windows\System32\ipc_webocx_vware\Version
number\IVS_OCXPlayer.ocx file to the DOS window. The complete command is
displayed, for example, regsvr32 -u C:\Windows\System32\ipc_webocx_vware
\2.0.6.3\IVS_OCXPlayer.ocx.
Press Enter. The window indicating the operation success is displayed.
Delete the C:\Windows\System32\ipc_webocx_vware\version number folder.
Log in to the web client again and download and install the ActiveX control as
prompted.
Log in to the camera as the admin user in SSH mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Appendix
182