Restarting The Ipc; Restoring The Ipc To Factory Settings - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide

14.10 Restarting the IPC

You can restart an IPC remotely.
Procedure
Step 1 Choose Settings > System Configuration > Device Maintenance.
The Device Maintenance page is displayed, as shown in
Figure 14-16 Device Maintenance page
Step 2 Click Remote restart.
The Restart page is displayed.
Step 3 Click OK.
The IPC automatically restarts.
----End

14.11 Restoring the IPC to Factory Settings

You can restore an IPC to its factory settings.
l After you perform the restoration operation, all device parameters (except for the device IP
l After you perform the full restoration operation, all device parameters (except for the
Issue 01 (2016-08-20)
NOTICE
address, port number, certificate uploaded by users, and focusing position of a fixed dome
camera or bullet camera in manual or semi-auto mode) will be restored to factory defaults.
Exercise caution when performing this operation.
focusing position of a fixed dome camera or bullet camera in manual or semi-auto mode)
will be restored to factory defaults. Exercise caution when performing this operation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 Managing the System
Figure 14-16.
175