Huawei IPC6125-WDL-FA Configuration Manual page 69

IPC6125-WDL-FA
Configuration Guide
Procedure
Step 1 Choose Settings > Channel Configuration > Area Metering Selection.
The Area Metering Selection page is displayed, as shown in
Figure 6-8 Area Metering Selection page
Step 2 Set Metering mode to Area metering.
Various metering modes are provided to allow users to select the most appropriate one for use
in a variety of lighting conditions.
l
l
This parameter is available only when you set Exposure mode to Auto exposure, Shutter priority, or
Aperture priority.
Step 3 Use the mouse pointer to draw metering areas. The default weight of the selected area is 15.
The default weight of unselected areas is 1.
Issue 01 (2016-08-20)
Area metering: In this metering mode, the camera averages the exposure for the entire
picture area, but with greater emphasis on a certain metering zone.
Auto metering (default): In this metering mode, the camera uses the light information
coming from the entire scene and averages for the final exposure setting, giving no
weighting to any particular portion of the metered.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Setting Video Parameters
Figure 6-8.
63