Setting Video Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
About This Chapter
This section describes how to set video parameters, such as video and audio stream
parameters.
6.1 Setting Video and Audio Stream Parameters
You can set video and audio parameters based on the site requirements.
6.2 Configuring a Stream Package
By configuring a stream package, you can predefine several common video and audio stream
parameters for quick invoking in the future.
6.3 Setting ISP Parameters
By setting Image Signal Processing (ISP) parameters, you can adjust video images to adapt to
different surveillance scenarios.
6.4 Configuring an ISP Package
You can configure a daily or yearly plan for scheduled tasks of ISP packages.
6.5 Setting Area Metering
If area metering is configured, different areas possess different metering weights. Area
metering configuration is applicable to scenarios with prominent subjects.
6.6 Setting ROI Parameters
By setting a region of interest (ROI), you can set the ROI quality to differentiate the ROI from
other image regions. The ROI effect is prominent at a low bit rate.
6.7 Setting the Focusing Region
If you set a focusing region for a camera, the camera preferentially focuses on the focusing
region.
6.8 Setting Image Overlay
You can set image overlay to specify the position where the image is displayed.
6.9 Setting Privacy Mask Parameters
You can set a privacy mask area on the live video for privacy protection.
6.10 Setting Motion Detection Parameters
An alarm is generated when an object moves within the specified surveillance range of the
camera.
Issue 01 (2016-08-20)
6

Setting Video Parameters

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Setting Video Parameters
43