Setting Sec Parameters - Huawei IPC6125-WDL-FA Configuration Manual

2-megapixel low-light wdr network box camera
Hide thumbs Also See for IPC6125-WDL-FA:
Table of Contents

Advertisement

IPC6125-WDL-FA
Configuration Guide
l You can add only one motion detection area at a time. If you need to add more motion detection areas,
l A maximum of four motion detection areas can be added.
Step 4 Use the mouse to adjust the location and size of the motion detection area.
Step 5 Set parameters. For detailed parameter description, see
Table 6-5 Parameter description
Parameter
Alarm check interval
Sensitivity
Step 6 Click Save.
l To delete a motion detection area, select the motion detection area on the live video image and click
l To delete all motion detection areas, click Delete all.
----End

6.11 Setting SEC Parameters

You can set super error correction (SEC) parameters to enhance packet loss resistance
capability and ensure video image quality in the case that packets are lost during video stream
transmission and artifacts occur on part of a video image.
Context
SEC is a bit error correction technology that can enhance data transmission reliability.
Procedure
Step 1 Choose Settings > Channel Configuration > Super Error Correction Parameters.
The Super Error Correction Parameters page is displayed, as shown in
Issue 01 (2016-08-20)
NOTE
click Add again.
NOTE
Delete.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Time interval at which the system checks for new alarms. The
system then reports detected alarms to the surveillance platform.
NOTE
l The MTU value is an integer ranging from 1 to 256. The default
value of is 5.
l Only one alarm is reported if an object keeps moving in the
surveillance range of the camera within a single alarm check interval.
This is to avoid repeated alarms.
Indicates the sensitivity of motion detection.
NOTE
l The MTU value is an integer ranging from 1 to 5. The default value
of is 3.
l A larger value indicates higher sensitivity. To detect slight motion, it
is recommended that you set the sensitivity to a larger value.
6 Setting Video Parameters
Table
6-5.
Figure
6-14.
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents