Huawei IPC6125-WDL-FA Configuration Manual page 27

IPC6125-WDL-FA
Configuration Guide
Parameter
To Change the ONVIF
Password
To Configure the ONVIF
Media Stream
To Enable the Keep-Alive
Function of ONVIF Media
Streams
Issue 01 (2016-08-20)
Description
1. In the Second Protocol Password management area,
enter passwords in the Web user password, New
password, and Confirm password fields.
NOTE
–
–
2. Click Save.
NOTE
l Select a proper stream type based on the decoder requirements.
l The ONVIF media stream can be configured only when the IPC
is connected to the video surveillance platform through the
ONVIF protocol.
Select a media transmission type from the Stream
transmission type drop-down list box.
l Elementary stream: uses the ES compression mode.
l Program stream: uses the PS compression mode.
Select Enable in the Media stream keep-alive switch area.
With the keep-alive function enabled for ONVIF media
streams, the IPC stops sending media streams if it does not
receive keep-alive packets sent by the video surveillance
platform within a specified period (60s by default).
If the video surveillance platform supports the keep-alive
function, you are advised to select Enable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Change the ONVIF password to ensure security.
When the IPC uses the ONVIF protocol to connect to the
video surveillance platform, you must enter this password.
Otherwise, the connection cannot be set up. If platform
authentication fails for consecutively 10 times, the IPC is
locked for 5 minutes. After you change the password, keep
the changed password safe.
The default user name is admin, The value of Web user
password must be the same as the password of the current
user who logs in to the IPC web client.
To improve security, the password must consist of 8 to 20
characters and contain at least two types of the following:
uppercase, lowercase, digits, and special characters.
Weak passwords can be verified.The weak passwords include
"1qaz!QAZ", "admin123", "admin123!", "Admin123!",
"Administrator", "datacache1", "datacache2", "datacache3",
"datacache4", "datacache5", "dlsDb001", "dlsDls01",
"guest123", "HWbss123", "huawei123", "Huawei!@#",
"LcaP2010", "lcap_oracle", "lcap_uoa", "password1",
"password123", "PortalONE", "prmt_ideploy", "Promotion",
"SDP Report", "u+versioncode", and "Change_Me".
3 Setting Basic Parameters
21