Setting Time Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide

3.4 Setting Time Parameters

You can set the time zone and calibrate the camera time. You can directly set the camera time
or set Network Time Protocol (NTP) parameters to time-synchronize the camera with the
NTP server in the network.Also if DST(Daylight saving time) is configured, the system will
automatically perform time offset based on the predefined offset after entering the DST.
Change the camera time when the camera is not recording video. If you change the camera
time during the video recording, the video file may be damaged.
Daylight saving time is the practice of temporarily advancing clocks during the summertime
so that afternoons have more daylight and mornings have less. Typically clocks are adjusted
forward one hour near the start of spring and backward one hour in autumn.
Procedure
Step 1 Choose Settings > System Configuration > Time Configuration.
The Time Configuration tab page is displayed, as shown in
Issue 01 (2016-08-20)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Setting Basic Parameters
Figure 3-8.
28