Setting Roi Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Click Clear select and reselect metering areas.
Step 4 Click Save.
----End

6.6 Setting ROI Parameters

By setting a region of interest (ROI), you can set the ROI quality to differentiate the ROI from
other image regions. The ROI effect is prominent at a low bit rate.
Prerequisites
The ROI function is available only when you set Coding protocol to H.264 and H.265.
Procedure
Step 1 Choose Settings > Channel Configuration > ROI Parameters.
The ROI Parameters page is displayed, as shown in
Figure 6-9 ROI Parameters page
Step 2 To enable ROI, select Enable.
Step 3 Select a value from the Code stream type drop-down list box.
Step 4 Click Add.
An ROI is displayed on the live video image.
l You can add only one ROI at a time. If you need to add more ROIs, click Add again.
l A maximum of four ROIs can be added.
Step 5 Use the mouse to adjust the ROI location and size.
Step 6 Select the ROI and set ROI Quality.
Issue 01 (2016-08-20)
NOTE
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Setting Video Parameters
Figure 6-9.
64