Table of Contents
Advertisement
IPC6125-WDL-FA
Configuration Guide
Figure 8-7 Adding a tour track
Step 3 Set the tour track.
1.
Set Track name.
A Chinese word occupies three characters in this Web page. If you attempt to set the track name to
Chinese words, the track name can contain a maximum of 10 Chinese words.
2.
Click Add Preset.
The Add preset to guard tour page is displayed.
3.
Select specified preset positions from the Preset drop-down list box and set the Dwell
duration.
–
–
4.
Click OK.
The Create tour track page is displayed.
5.
Add more preset positions by following the preceding steps.
–
–
Step 4 Click Save.
The tour track is successfully added.
Issue 01 (2016-08-20)
NOTE
NOTE
For the cameras with PTZs connected, the value of Dwell duration(s) must be longer than the time
required for rotating a camera from a previous preset to the specified preset.
For the cameras with PTZs connected, if you adjust the rotation speed of the PTZ camera after
configuring a tour track, the value of Dwell duration(s) may be smaller than the time required for
rotating a camera from a previous preset to the specified preset. In this case, reset Dwell
duration(s).
NOTE
After you select a preset position, you can click Insert cruise point and add a preset position above
the selected preset position.
You can drag preset positions to adjust their relative positions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Setting PTZ Control Parameters
98
Hide quick links:
Advertisement
Table of Contents
