Huawei IPC6125-WDL-FA Configuration Manual page 22

IPC6125-WDL-FA
Configuration Guide
Figure 3-3 SDK configuration
Step 3 Change the SDK password.
Change the SDK password to ensure security.
When the IPC uses the SDK protocol to connect to the video surveillance platform, you must enter this
password. Otherwise, the connection cannot be set up. If platform authentication fails for consecutively 5
times, the IPC is locked for 3 minutes. After you change the password, keep the changed password safe.
1.
2.
Issue 01 (2016-08-20)
NOTE
In the SDK Password management area, enter passwords in the Web user password,
New password, and Confirm password fields.
NOTE
– The default user name is admin, The value of Web user password must be the same as the
password of the current user who logs in to the IPC web client.
– To improve security, the password must consist of 8 to 20 characters and contain at least two types
of the following: uppercase, lowercase, digits, and special characters.
– Weak passwords can be verified.The weak passwords include "1qaz!QAZ", "admin123",
"admin123!", "Admin123!", "Administrator", "datacache1", "datacache2", "datacache3",
"datacache4", "datacache5", "dlsDb001", "dlsDls01", "guest123", "HWbss123", "huawei123",
"Huawei!@#", "LcaP2010", "lcap_oracle", "lcap_uoa", "password1", "password123", "PortalONE",
"prmt_ideploy", "Promotion", "SDP Report", "u+versioncode", and "Change_Me".
Click Save.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Setting Basic Parameters
16