Huawei IPC6125-WDL-FA Configuration Manual page 160

IPC6125-WDL-FA
Configuration Guide
Parameter
Directory
FirstDirectory
SecondDirectory
Naming Rule
Server IP
Issue 01 (2016-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Configuring the Snapshot
Note
Indicates the directory for storing uploaded
snapshots on the server.
l Save in root directory: root directory
for storing uploaded snapshots.
l Use first directory: level-1 directory for
storing uploaded snapshots.
l Use second directory: level-2 directory
for storing uploaded snapshots.
NOTE
The path length cannot be too long. If the total
length of the level-1 directory path and the
level-2 directory path exceeds the maximum
length specified by the operating system where
the SFTP or FTP server runs, paths cannot be
created or pictures cannot be uploaded.
You can set this parameter only when
Directory is set to Use first directory and
Use second directory.
l Equipment ip: device IP address as the
folder name, such as 192.168.0.135.
l Custom: self-defined directory.
NOTE
Enter a string of 1 to 128 characters that
cannot contain the following characters: &
<>"\'()/:*?|.
You can set this parameter only when
Directory is set to Use second directory.
l Channel Number: directory under the
level-1 directory, named after the
channel number 101.
l Custom: self-defined directory.
NOTE
Enter a string of 1 to 128 characters that
cannot contain the following characters: &
<>"\'()/:*?|.
Indicates rules for naming snapshots, such
as 20150103170230_T02_00000001.jpg.
NOTE
In the snapshot name, "T" indicates a snapshot
taken as scheduled, "A" indicates an alarm-
triggered snapshot, and "M" indicates a platform
snapshot, "00000001" indicates the snapshot ID
(The ID consists of eight hexadecimal digits. The
maximum value is FFFFFFFF.).
Indicates the IP address of the server for
storing uploaded snapshots.
154