Setting Snmp Parameters; Set Snmp V1/V2C Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Parameter
Certificate file (.pem)
Key file (.pem)
----End

7.7 Setting SNMP Parameters

By setting Simple Network Management Protocol (SNMP) parameters, you can view and
modify IPC configurations on the network management system (NMS), which facilitates IPC
maintenance and management.
Context
When the IPC is connected to the NMS through the SNMP protocol, you can obtain and
modify IPC configurations on the NMS.
The SNMP protocol includes the SNMP v1, SNMP v2c, and SNMP v3 versions.
To improve security, you are advised to use SNMP v3 and set Privacy protocol to AES.
The IPC reports related information to the NMS.
Set SNMP parameters based on the site requirements.

7.7.1 Set SNMP v1/v2c parameters

When SNMP v1 or SNMP v2c is used, the NMS visits the IPC using a community name with
the read-only or read-write right.
Context
Two sets of interaction parameters have been set by default. You can use the default settings,
or click Modify or Delete to modify or delete them. When SNMP v1 or SNMP v2c is used,
you can set a maximum of three sets of interaction parameters. This section mainly describes
how to add a set of interaction parameters.
Procedure
Step 1 Choose Settings > Network Configuration > SNMP Parameters.
The SNMP Parameters page is displayed, as shown in
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Digital information file that
identifies and verifies both
parties involved in network
communication
File containing the
certificate key
7 Setting Network Parameters
How to Set
2. In the dialog box that is
displayed, enter the
private key file
password.
3. Click Upload to upload
the certificate.
NOTE
To obtain the private
certificate, purchase it from an
authoritative third-party
certification body or establish
a CA server.
Figure 7-11.
82