Huawei IPC6125-WDL-FA Configuration Manual page 46

IPC6125-WDL-FA
Configuration Guide
Button
Issue 01 (2016-08-20)
Enables You To...
Start and stop local recording.
The records are stored in the directory in the path
configured in Path for saving video of local parameters.
The directory is named by the camera IP address. The
record is named in the format of IPC Model_YYYY-
MM-DD-HH-MM-SS_MSMSMS, for example,
IPC6125-WDL-D_2014-03-28-09-00-06_001.
For details about how to configure Path for saving
video, see
The button blinks during the local recording.
NOTE
You need to run the web browser as the administrator.
The local recording will stop in one of the following scenarios:
l Users manually stop the local recording.
l The recording times out.
l Users manually stop live video viewing.
l Users close the current browser.
Start secure data (SD) card recording. This function is
available only on an IPC with a built-in SD card.
Audio stream on or off. To close this function, click .
The function is available only when you set Video
stream type to Hybrid stream. For details, see
Setting Local
Drag the slider to set the volume.
NOTE
Audio stream and two-way audio cannot be enabled at the same
time.
Start or stop two-way audio. To close this function, click
.
Drag the slider to set the volume.
NOTE
Two-way audio and audio stream cannot be enabled at the same
time.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14.5 Setting Local Parameters.
Parameters.
4 Live Video Viewing
14.5
40