Huawei IPC6125-WDL-FA Configuration Manual page 31

IPC6125-WDL-FA
Configuration Guide
Parameter
To Change the GENETEC
Password
To Enable the Keep-Alive
Function of GENETEC Media
Streams
GENETEC Abstract switch
----End
Issue 01 (2016-08-20)
Description
NOTE
Change the GENETEC password to ensure security.
When the IPC uses the GENETEC protocol to connect to the
video surveillance platform, you must enter this password.
Otherwise, the connection cannot be set up. If platform
authentication fails for consecutively 10 times, the IPC is
locked for 5 minutes. After you change the password, keep the
changed password safe.
1. In the Second Protocol Password management
2. Click Save.
Select Enable in the Media stream keep-alive switch
area.
With the keep-alive function enabled for GENETEC
media streams, the IPC stops sending media streams if it
does not receive keep-alive packets sent by the video
surveillance platform within a specified period (60s by
default).
If the video surveillance platform supports the keep-alive
function, you are advised to select Enable.
HTTP digest authentication is enabled on an IPC by
default.
NOTE
l If the GENETEC platform does not support HTTP digest
l If the GENETEC platform supports HTTP digest
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
area, enter passwords in the Web user password,
New password, and Confirm password fields.
NOTE
The default user name is admin, The value of Web user
password must be the same as the password of the current
user who logs in to the IPC web client.
To improve security, the password must consist of 8 to 20
characters and contain at least two types of the following:
uppercase, lowercase, digits, and special characters.
Weak passwords can be verified.The weak passwords
include "1qaz!QAZ", "admin123", "admin123!",
"Admin123!", "Administrator", "datacache1", "datacache2",
"datacache3", "datacache4", "datacache5", "dlsDb001",
"dlsDls01", "guest123", "HWbss123", "huawei123",
"Huawei!@#", "LcaP2010", "lcap_oracle", "lcap_uoa",
"password1", "password123", "PortalONE",
"prmt_ideploy", "Promotion", "SDP Report", "u
+versioncode", and "Change_Me".
authentication, deselect GENETEC Abstract switch. In
this case, security risks may exist.
authentication, select GENETEC Abstract switch. If you
do not select GENETEC Abstract switch, security risks
may exist.
3 Setting Basic Parameters
25