Setting Preset Position Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
l The PTZ parameters configured on the IPC must be the same as those configured on the external PTZ.
l The Enable in the transparent channel and Enable serial port in the PTZ parameters area cannot be
Table 8-2 Parameter description
Parameter
PTZ ID
Enable serial port
Serial port ID
PTZ protocol
PTZ address
Direction control
Wiper linkage switch
output 1
Step 3 Click Save.
----End

8.2 Setting Preset Position Parameters

After a preset position is configured, you can quickly rotate the IPC to the required position.
You can add, modify, and delete preset positions. A maximum of 256 preset positions can be
added for an IPC.
Context
The IPC's horizontal shooting angle, vertical shooting angle, and zoom times can be stored as
a preset position. The preset position can be numbered.
Issue 01 (2016-08-20)
NOTE
Otherwise, the PTZ functionality may not work properly.
selected at the same time.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Unique ID of the PTZ.
Indicates whether to enable the serial port.
The same as the PTZ serial port number.
The same as the PTZ protocol.
The same as the PTZ address.
Enables forward or backward PTZ control:
l Forward
Enables the forward control of the PTZ. For example, if
you click the left button, the PTZ moves leftward.
l Backward
Enables the backward control of the PTZ. For example, if
you click the left button, the PTZ moves rightward.
Indicates whether to enable the wiper linkage switch output
1.
NOTE
l To use the rain wiper that is controlled by the Boolean value,
connect the rain wiper to Boolean value output 1 and enable this
function.
l You cannot enable this function if Boolean value output 1
connects to an alarm device.
l If this function is disabled, the rain wiper button is unavailable.
8 Setting PTZ Control Parameters
95