Table of Contents
Advertisement
IPC6125-WDL-FA
Configuration Guide
9
Setting Intelligent Analysis Parameters
About This Chapter
This section describes how to set behavior analysis parameters and video block detection of
intelligent analysis.
The device does not support intelligent analysis during lens zooming.
9.1 Configuring the Intrusion Detection Function
The intrusion detection function checks whether an object enters a sensitive area (a key
surveillance area for which behavior analysis rules have been configured). The system
generates an alarm when an object enters a sensitive area.
9.2 Configuring the Loitering Detection Function
The loitering detection function checks whether an object loiters in a sensitive area for a time
period longer than a specified duration. The system generates an alarm when a loitering object
is detected.
9.3 Configuring the Abandoned Object Detection Function
The abandoned object detection function checks a sensitive area for objects that have been
abandoned for 5 seconds or longer. The system generates an alarm when an abandoned object
is detected.
9.4 Configuring the Removed Object Detection Function
The removed object detection function checks whether an object is removed from a sensitive
area. The system generates an alarm when an object is removed.
9.5 Configuring the Tripwire Detection Function
The tripwire detection function checks whether a person or an object crosses a specified
tripwire in a specified direction. The system generates an alarm when a person or an object
crosses the tripwire.
9.6 Configuring the Video Block Detection Function
You can configure video block detection function for the full screen. After the configuration,
an alarm will be generated when the camera lens is blocked.
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Setting Intelligent Analysis Parameters
101
Hide quick links:
Advertisement
Table of Contents
