Failure To Enter The Full-Screen Mode Upon The First Double-Click When Viewing Live Video On The Preview Tab Page; The Button Is Blue After Functions In The Live Video Preview Window Are Exited; Users Are Unable To View Live Video; Live Video Image Artifacts Occur And The Cpu Usage Reaches 100 - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
15.1.27 Failure To Enter The Full-Screen Mode Upon The First
Double-Click When Viewing Live Video On The Preview Tab
Page
Symptom
A user logs in to the IPC web client using the Firefox browser or Internet Explorer 11. On the
Preview tab page, the user double-clicks the live video pane, but the live video pane does not
enter the full-screen mode.
Solution
This fault occurs only at the first double-click. Try once again.
15.1.28 The Button Is Blue After Functions In The Live Video
Preview Window Are Exited
Symptom
l
l
Procedure
This does not affect functions. Move the pointer out of the live video preview scope, and the
buttons are displayed normally.

15.1.29 Users Are Unable To View Live Video

Symptom
After you access the web page of an IPC to view live video, a blank screen appears.
Possible Cause
No driver mapping the hardware display adapter (card) is installed, or the version of the
existing driver is too old.
Solution
Install a display adapter (card) driver or upgrade the existing display adapter (card) driver.
15.1.30 Live Video Image Artifacts Occur and The CPU Usage
Reaches 100%
Symptom

Live video image artifacts occur and the CPU usage reaches 100%.

Issue 01 (2016-08-20)
The user clicks Full-Screen and then exits the full screen mode. When the user moves
the pointer to the live video preview scope, the Full-Screen is blue.
The user clicks the 1:1 or Snapshot button and quickly moves the pointer to the live
video preview scope, the 1:1 or Snapshot button is blue.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Appendix
192