Setting Home Position Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
l To enable a tour track, select the tour track and click Running.
l To disable a tour track that is running, select the tour track and click Stop.
l You can enable only one tour track at a time. If a tour track has been enabled and you enable another tour
l You can view the tour track status in the Status column.
l To modify or delete a tour track, select it and click Modify or Delete.
l To modify a tour track, you must stop the tour track first.
----End

8.4 Setting Home Position Parameters

You can set a home position (a special preset position) for the IPC. If users do not control the
PTZ device within a specified period, the PTZ device automatically rotates to the preset home
position.
Procedure
Step 1 Choose Settings > PTZ Configuration > Keep Watch Parameters.
The page for Keep Watch Parameters is displayed, as shown in
Figure 8-8 Page for setting home position parameters
Step 2 Set parameters. For detailed parameter description, see
Table 8-3 Parameter description
Parameter
Enable
Rye waiting time
Issue 01 (2016-08-20)
NOTE
track, the tour track that has been enabled will automatically stop.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Setting PTZ Control Parameters
Figure
Table 8-3.
Description
Indicates whether to enable a home position.
Indicates the interval from the time when
users stop operating the PTZ device to the
time when the PTZ device automatically
rotates to the home position. The value is in
seconds.
8-8.
99