IPC6125-WDL-FA
Configuration Guide
Figure 7-2 QoS parameters
l
l
The value is an integer ranging from 0 to 63. A larger value means a higher priority. The default values of
are0.
Step 3 Click Save.
----End
7.1.3 Setting Attack Defense Parameters
The Received rate limit parameter specifies the maximum number of packets that an IPC can
receive per second, defending IPC from network flood attacks.
Procedure
Step 1 Choose Settings > Network Configuration > Network Parameters.
The page for Network Parameters is displayed.
Step 2 In the Against attacks parameters area, set Received rate limit, as shown in
Figure 7-3 Against attacks parameters
The value is an integer ranging from 2000 to 8000. The default value of is 6000.
Step 3 Click Save.
----End
Issue 01 (2016-08-20)
Media stream: media transferred and played over the network in streaming mode, such as
audio, video, and multimedia files.
Signaling stream: signaling and control information, such as registration and live video
viewing requests.
NOTE
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Setting Network Parameters
Figure
7-3.
75