Cannot Enter Time In The Input Box For Setting Time On Web; The Page Cannot Switch Automatically When The Default Setting Is Restored If The Ipc Uses The Http Protocol; The Player Control Fails To Install After Upgrading Successfully On Windows 8 Of 64-Bit Operating System - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
15.1.17 Cannot Enter Time In The Input Box For Setting Time On
Web Pages
Symptom
You cannot enter time in the input box for setting time (for example, alarm deployment time)
on web pages.
Possible Cause
The current input method is Microsoft pinyin input method.
Solution
Switch the input method to an English input method.
15.1.18 The Page Cannot Switch Automatically When The Default
Setting Is Restored If The IPC Uses The HTTP Protocol
Symptom
If the IPC uses the HTTP protocol, the page cannot switch automatically when the default
setting is restored.
Possible Cause
This problem is caused by the settings of access data sources across domains.
Solution
Open Internet Explorer, choose Tools > Internet Options > Security > Custom level >
Miscellaneous, and set Access data sources across domains to Enable or Prompt.
If Access data sources across domains is set to Prompt, the security warning dialog box is displayed during
page switch. Click Yes.
15.1.19 The Player Control Fails To Install After Upgrading
Successfully On Windows 8 of 64-bit Operating System
Symptom
On Windows 8 of 64-bit operating system, the player control fails to install after upgrading
successfully.
Possible Cause
An exception occurs on the operating system cache.
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Appendix
186