Setting Alarm Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
About This Chapter
This section describes how to set alarm parameters, including alarm input and output
parameters, temperature alarm parameters, alarm deployment plans, and alarm linkage
policies.
10.1 Setting Alarm Input and Output Parameters
Alarms can be linked by setting alarm input and output parameters.
10.2 Setting Temperature Alarm Parameters
When the IPC operating temperature is out of a specific range (-20°C to +60°C), a
temperature alarm is generated.
10.3 Setting Alarm Deployment Policy Parameters
You can specify an alarm deployment policy for the IPC, that is, specify a time segment for
receiving specified alarms. If the IPC is not configured with any alarm deployment policy, no
alarm is generated.
10.4 Setting Alarm Linkage Policy Parameters
When an exception such as lens block occurs, the system can trigger proper actions according
to the preset alarm linkage policy.
Issue 01 (2016-08-20)
10

Setting Alarm Parameters

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Setting Alarm Parameters
138