Huawei IPC6125-WDL-FA Configuration Manual page 125

IPC6125-WDL-FA
Configuration Guide
Parameter
Alarm check interval
Step 4 Draw a sensitive area.
1.
2.
3.
Issue 01 (2016-08-20)
Use the PTZ control panel to rotate the PTZ device to a target position.
Click Draw and draw a sensitive area on the live video image.
Specify the sensitive area name, and click Save.
For detailed parameter description, see
Table 9-10 Parameter description
Parameter
Draw
Delete
Enable/Stop
ID.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Setting Intelligent Analysis Parameters
Description
Time interval at which the system checks
for new alarms. The system then reports
detected alarms to the surveillance platform.
NOTE
To prevent a flood of alarms, the system reports
only one alarm even if it detects multiple alarms
within the specified interval.
Table 9-10.
Description
Indicates the button for drawing a
sensitive area.
NOTE
– A sensitive area can be a triangle,
rectangle, or polygon.
– To redraw a sensitive area or tripwire that
is not saved, click Redraw.
– A sensitive area supports a maximum of
10 vertexes.
– A maximum of four sensitive areas can be
configured for a type of behavior analysis.
A maximum of 10 sensitive areas can be
configured for all types of behavior
analysis.
– You can perform operations on a single
sensitive area at a time.
Indicates the button for deleting a
sensitive area.
To delete a sensitive area, select the
sensitive area or tripwire in the sensitive
area or tripwire list and click Delete.
Indicates the button for enabling or
disabling a sensitive area or tripwire.
To enable or disable a sensitive area or
tripwire, select the sensitive area or
tripwire in the sensitive area or tripwire
list and click Enable or Stop.
Indicates the ID of a sensitive area.
119