Breaker Maintenance; Product Information; Model Information - GE N60 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The number of triggers applicable to all the phasor measurement unit recorders is indicated by the
value. The status for each of the six phasor measurement unit recorders is indicated as follows:
ACTUAL VALUES  RECORDS  PMU RECORDS  PMU 1(6) RECORDING
 PMU 1
 RECORDING

6.4.6 Breaker maintenance

ACTUAL VALUES  RECORDS  MAINTENANCE  BREAKER 1
 BREAKER 1

There is an identical menu for each of the breakers.
The values are in units of kA
BKR 1 ARCING AMP
arcing current records.
The
BREAKER OPERATING TIME

6.5 Product information

6.5.1 Model information

ACTUAL VALUES  PRODUCT INFO  MODEL INFORMATION
 MODEL INFORMATION

N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
 PMU 1

 RECORDING

 PMU 6

 RECORDING
PMU 1 FORCE TRIGGER:

Yes
PMU 1 AVAILABLE

RECORDS: 0
PMU 1 SECONDS

PER RECORD: 0.0
PMU 1 LAST CLEARED:

2005/07/14 015:40:16
BKR 1 ARCING AMP A:

0.00 kA2-cyc
BKR 1 ARCING AMP B:

0.00 kA2-cyc
BKR 1 ARCING AMP C:

0.00 kA2-cyc
BKR 1 OPERATING TIME

A: 0 ms
BKR 1 OPERATING TIME

B:
0 ms
BKR 1 OPERATING TIME

C:
0 ms
BKR 1 OPERATING

TIME: 0 ms
2
-cycles. See the
is defined as the slowest operating time of breaker poles that were initiated to open.
ORDER CODE LINE 1:

N60-A00-AAA-A0A-A0A
See below
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: date and time in format shown
COMMANDS  CLEAR RECORDS
Range: standard GE order code format (lines 1 to 4)
PRODUCT INFORMATION
NUMBER OF TRIGGERS
menu for clearing breaker
6-25
6