STATUS
The present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtual
input. For example, 'Virt Ip 1' refers to the virtual input in terms of the default name. The second line of the display indicates
the logic state of the virtual input.
6.2.3 RxGOOSE boolean inputs
ACTUAL VALUES STATUS RxGOOSE BOOLEAN
RxGOOSE BOOLEAN
The N60 is provided with optional IEC 61850 capability. This feature is specified as a software option at
the time of ordering. See the Order Codes section of chapter 2 for details.
6.2.4 RxGOOSE DPS inputs
ACTUAL VALUES STATUS RxGOOSE DPS
RxGOOSE DPS
6
The N60 is provided with optional IEC 61850 capability. This feature is specified as a software option at
the time of ordering. See the Order Codes section of chapter 2 for details.
6.2.5 Teleprotection inputs
ACTUAL VALUES STATUS TELEPROTECTION INPUTS
TELEPROTECTION
INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed is
that of corresponding remote output unless the channel is declared failed.
6-4
RxGOOSE BOOLEAN 1
RxGOOSE BOOLEAN 128
RxGOOSE DPS 1
RxGOOSE DPS 5
TELEPROTECTION
INPUT 1-1: Off
TELEPROTECTION
INPUT 1-16: Off
TELEPROTECTION
INPUT 2-1: Off
TELEPROTECTION
INPUT 2-16: Off
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: On, Off
Range: On, Off
Range: On, Off, Intermediate, Bad
Range: On, Off, Intermediate, Bad
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off