GE N60 Instruction Manual page 95
Network stability and
synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
CHAPTER 4: INTERFACES
Once the template has been applied, users are limited to view and edit the FlexLogic entries not locked by the template.
The effect of applying the template to the FlexLogic entries is shown here.
Figure 4-8: Locking FlexLogic entries through settings templates
Typical FlexLogic™ entries without template applied.
The FlexLogic entries are also shown as locked in the graphical view and on the front panel display.
4.1.7.2 Lock FlexLogic entries to the serial number
A settings file and associated FlexLogic equations also can be locked to a UR serial number. Once FlexLogic entries in a
settings file have been secured, use the following procedure to lock the settings file to a serial number.
1.
Right-click the setting file in the offline window area and select the Edit Settings File Properties item. The window
opens.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Typical
the
Figure 4-9: Secured FlexLogic in graphical view
ENERVISTA SOFTWARE INTERFACE
FlexLogic™ entries
locked with template via
Template Mode > View In Template Mode
command.
842861A1.CDR
4-9
4
Advertisement
Table of Contents
