Interface - GE N60 Instruction Manual

DIRECT INPUT AND OUTPUT COMMUNICATIONS
3
The following figure shows configuration for the 2I and 2J fiber-laser modules.
3.4.4 G.703 interface
3.4.4.1 Description
The following figure shows the 64K ITU G.703 co-directional interface configuration.
The G.703 module is fixed at 64 kbps. The
applicable to this module.
3-24
Figure 3-25: 7x Laser fiber modules
Figure 3-26: 2I and 2J laser fiber modules
Observing any fiber transmitter output can injure the eye.
When using a laser Interface, attenuators can be necessary to ensure that you do not exceed the
maximum optical input power to the receiver.
SETTINGS  PRODUCT SETUP  DIRECT I/O  DIRECT I/O DATA RATE
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION
setting is not