Security - GE N60 Instruction Manual

CHAPTER 2: PRODUCT DESCRIPTION
52
50P
N60
Table 2-2: Other device functions
Function
Breaker control
Contact inputs (up to 96)
Contact outputs (up to 64)
Control pushbuttons
CyberSentry™ security
Data logger
Digital counters (8)
Digital elements (16)
Digitizer
Direct analog inputs and outputs (32)
Direct inputs and outputs (64)
Disconnect switches
DNP 3.0 or IEC 60870-5-104 protocol
Eight-bit switch
Event recorder

2.2 Security

The following security features are available:
• Password security — Basic security present by default
• EnerVista security — Role-based access to various EnerVista software screens and configuration elements. The
feature is present by default in the EnerVista software.
• CyberSentry security — Advanced security available as a software option. When purchased, the options are
automatically enabled, and the default Password security and EnerVista security are disabled.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Figure 2-1: Single-line diagram
TRIP
CLOSE
32
2 2
METERING
Transducer
TM Digitizer
FlexElement
Inputs
Network Stability and Security Relay
Function
FlexElements™ (16)
FlexLogic equations
Generic comparator
Metering: current, demand, energy,
frequency, power, power factor, voltage
IEC 60870-5-103 communications
IEC 61850 communications
IEC 61850 remote inputs and outputs
(GSSE/GOOSE)
Modbus communications
Modbus user map
Non-volatile latches
Non-volatile selector switch
Open pole detect
Oscillography
Setting groups (6)
Synchrophasors
2 3 4 5
Same Functions as Breaker 1
For Breaker 1
27P 59P 81U 81O
6
2 1 4
Function
Teleprotection inputs and outputs
Time synchronization over IRIG-B or IEEE
1588
Time synchronization over SNTP
Transducer inputs and outputs
Trip output
User-definable displays
User-definable fault reports
User-programmable LEDs
User-programmable pushbuttons
User-programmable self-tests
Virtual inputs (64)
Virtual outputs (96)
VT fuse failure
SECURITY
81R
4
25
2
847700A2.CDR
2-3
2