PRODUCT INFORMATION
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
The rear panel on the device contains similar information.
6.5.2 Firmware revisions
ACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONS
FIRMWARE REVISIONS
6
The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed.
6-26
SERIAL NUMBER:
ETHERNET MAC ADDRESS
000000000000
MANUFACTURING DATE:
0
OPERATING TIME:
0:00:00
PMU FEATURE ACTIVE:
No
CT/ VT ADVANCED DIAG
ACTIVE: No
LAST SETTING CHANGE:
1970/01/01 23:11:19
N60 Relay
REVISION: 7.3x
MODIFICATION FILE
NUMBER:
0
BOOT PROGRAM
REVISION: 7.01
FRONT PANEL PROGRAM
REVISION: 2.01
COMPILE DATE:
2013/09/15 04:55:16
BOOT DATE:
2013/09/15 16:41:32
FPGA PROGRAM:
REVISION: 01.05
FPGA DATA:
2013/09/15 16:41:32
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: Yes, No
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date and time when product firmware was built.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the boot program was built.
Range: 0.00 to 655.35
Revision number for FPGA.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the FPGA was built.