Phasor Measurement Unit Records; Breaker Maintenance - GE N60 Instruction Manual

RECORDS
The
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS

6.5.5 Phasor Measurement Unit records

ACTUAL VALUES  RECORDS  PMU RECORDS
 PMU
 RECORDS
The number of triggers applicable to all the phasor measurement unit recorders is indicated by the
value. The status for each of the six phasor measurement unit recorders is indicated as follows:
ACTUAL VALUES  RECORDS  PMU RECORDS  PMU 1(6) RECORDING
 PMU 1
 RECORDING
6

6.5.6 Breaker maintenance

ACTUAL VALUES  RECORDS  MAINTENANCE  BREAKER 1
 BREAKER 1

6-28
represents the time at which the oldest available samples were taken. It is static until the log gets
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
NUMBER OF TRIGGERS:

0
 PMU 1

 RECORDING
 PMU 6

 RECORDING
PMU 1 FORCE TRIGGER:

Yes
PMU 1 AVAILABLE

RECORDS:
PMU 1 SECONDS PER

RECORD:
PMU 1 LAST CLEARED:

2005/07/14 015:40:16
BKR 1 ACC ARCING AMP

φA: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φB: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φC: 0.00 kA2-cyc
BKR 1 OPERATING TIME

φA:
0 ms
BKR 1 OPERATING TIME

φB:
0 ms
BKR 1 OPERATING TIME

φC: 0 ms
BKR 1 OPERATING

TIME: 0 ms
BKR 1 ARCING AMP φA:

0.00 kA2-cyc
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Range: 0 to 65535 in steps of 1
See below

Range: No, Yes
Range: 0 to 65535 in steps of 1
0
Range: 0 to 6553.5 in steps of 0.1
0.0
Range: date and time in format shown
CHAPTER 6: ACTUAL VALUES
NUMBER OF TRIGGERS