Set Up Join And Direct Transfer Policy; Set Up Https For Phone Services - Cisco 7821 Administration Manual

Set Up Join and Direct Transfer Policy

Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer feature implementation
on the Cisco IP Phone. In order for these applications to control and monitor these phones, you must configure
the Join and Direct Transfer Policy to disable join and direct transfer on the same line or possibly across lines.
Because this parameter can be configured in three different windows, the setting that takes precedence is
determined in the following order:
1 Device Configuration window settings
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings
When you change the setting of the Join and Direct Transfer Policy parameter, you must check the Override
Common Settings box for the setting to take effect. The default policy is to have Same line, across line enabled
for join and direct transfer.
To determine the proper setting for this parameter, refer to the documentation of the JTAPI/TAPI application.
Procedure
Step 1 To configure the policy for all phones on the system, choose System > Enterprise Phone Configurations.
Step 2
To configure the policy to a group of phones, choose Device > Device Settings > Common Phone Profile.
Step 3 To configure the policy on an individual phone, configure the Join and Direct Transfer Policy in the Phone
Configuration for the specific phone in Device > Phone.
Step 4
Set the Join and Direct Transfer Policy field.
Step 5 Check the Override Common Settings box.
Step 6 Select Save.

Set Up HTTPS for Phone Services

You can increase security by requiring that communications use HTTPS instead of HTTP.
Note IP Phones can be HTTPS clients; they cannot be HTTPS servers.
For more information, see the Cisco Unified Communications Manager Security Guide.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Set Up Join and Direct Transfer Policy
135