Cisco 7821 Administration Manual page 121

Feature
Private Line Automated Ringdown
(PLAR)
Programmable Feature Buttons
Quality Reporting Tool (QRT)
Redial
Reroute Direct Calls to Remote
Destination to Enterprise Number
Remote Port Configuration
Description and more information
The Cisco Unified Communications Manager administrator can configure a phone number
that the Cisco IP Phone dials as soon as the handset goes off hook. This can be useful for
phones that are designated for calling emergency or "hotline" numbers.
See the Cisco Unified Communications Manager Administration Guide, "Directory Number
Configuration" chapter.
You can assign features, such as New Call, Call Back, and Forward All to line buttons.
See:
• Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
chapter
• Cisco Unified Communications Manager Administration Guide, "Phone Button Template
Configuration" chapter
Allows users to submit information about problem phone calls by pressing a button. QRT
can be configured for either of two user modes, depending upon the amount of user interaction
desired with QRT.
See:
• Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
chapter
• Cisco Unified Communications Manager Features and Services Guide, "Quality Report
Tool" chapter
Allows users to call the most recently dialed phone number by pressing a button or the Redial
softkey.
Reroutes a direct call to a user's mobile phone to the enterprise number (desk phone). For an
incoming call to remote destination (mobile phone), only remote destination rings; desk phone
does not ring. When the call is answered on their mobile phone, the desk phone displays a
Remote In Use message. During these calls, users can make use of various features of their
mobile phone.
See the Cisco Unified Communications Manager Features and Services Guide, "Cisco Unified
Mobility" chapter.
Allows you to configure the speed and duplex function of the phone Ethernet ports remotely
by using Cisco Unified Communications Manager Administration. This enhances the
performance for large deployments with specific port settings.
Note If the ports are configured for Remote Port Configuration in Cisco Unified
Communications Manager, the data cannot be changed on the phone.
See Set Up Remote Port Configuration, on page
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Telephony Features for Cisco IP Phone
127.
107