Disable Speakerphone; Schedule Power Save For Cisco Ip Phone - Cisco 7821 Administration Manual

Feature name
Transfer

Disable Speakerphone

By default, the speakerphone is enabled on the Cisco IP Phone.
You can disable the speakerphone by using Cisco Unified Communications Manager Administration. When
the speakerphone is disabled, the Redial, New Call, and Forward All softkeys are not displayed on the phones
when the user presses the speakerphone button. The softkey labels are dimmed or removed.
Procedure
Step 1 Select Device > Phone.
Step 2
Select the phone you want to modify.
Step 3 In the Phone Configuration window for the phone, check the Disable Speakerphone check box.
Step 4 Select Save.

Schedule Power Save for Cisco IP Phone

To conserve power and ensure the longevity of the phone screen display, you can set the display to turn off
when it is not needed.
You can configure settings in Cisco Unified Communications Manager Administration to turn off the display
at a designated time on some days and all day on other days. For example, you may choose to turn off the
display after business hours on weekdays and all day on Saturdays and Sundays.
You can take any of these actions to turn on the display any time it is off:
• Press any button on the phone.
• Lift the handset.
When you turn the display on, it remains on until the phone has remained idle for a designated length of time,
then it turns off automatically.
Dedicated feature
button
X
The phone takes the action designated by that button in addition to turning on the display.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Programmable feature
button
Disable Speakerphone
Softkey
X (available during a
transfer only)
113