Set Up Remote Port Configuration - Cisco 7821 Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Find your phone from the list of phones that associate with the Cisco Unified Communications Manager.
Step 3 Click on the Device Name of the phone.
Step 4
Go to Product Specific Configuration Layout area and select Enable from the Peer Firmware Sharing drop-down
list.
The Peer Firmware Sharing is enabled by default.
Step 5 Check the Override Common Settings check box for any setting in the Product Specific Configuration area
that you wish to update.
• If you do not check this check box, the corresponding parameter setting does not take effect.
• Parameters that you set in the Product Specific Configuration area may also appear in the Phone
If you set these same parameters in these other windows too, the setting that takes precedence is determined
in the following order:
1 Device Configuration window settings (highest precedence)
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings (lowest precedence)
Step 6
Select Save.

Set Up Remote Port Configuration

To configure the Switch Remote Port Configuration parameter or the PC Remote Port Configuration parameter,
you can configure individual phones or multiple phones.
Procedure
Step 1 To configure the parameter for individual phones, perform the following steps:
a) In Cisco Unified Communications Manager Administration, choose Device > Phone
b) Select the appropriate IP Phones
c) Scroll to the Product Specific Configuration Layout area (Switch Port Remote Configuration or PC Port
Remote Configuration) and set the parameter.
d) Select Save.
Step 2
To configure the setting on multiple phones simultaneously, perform the following steps:
a) In Cisco Unified Communications Manager Administration, choose System > Enterprise Phone
Configuration
b) Configure the Remote Port Configuration parameter.
Configuration window for various devices and in the Enterprise Phone Configuration window.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Set Up Remote Port Configuration
127