Cisco 7821 Administration Manual page 51

• Network Setup: Provides options for viewing and configuring a variety of network settings.
◦ IPv4 Setup: This submenu provides additional network options.
◦ IPv6 Setup: This submenu provides additional network options.
• Security Setup: Provides options for viewing and configuring a variety of security settings.
Note You can control whether a phone has access to the Settings menu or to options on this menu by using the
Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration
window. The Settings Access field accepts these values:
• Enabled: Allows access to the Settings menu.
• Disabled: Prevents access to the Settings menu.
• Restricted: Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
If you cannot access an option on the Admin Settings menu, check the Settings Access field.
You configure settings that are display-only on the phone in Cisco Unified Communications Manager
Administration.
To display a configuration menu, follow these steps:
Procedure
Step 1
Press Applications
Step 2 Select Admin Settings.
Step 3
Enter password if required.
Step 4 Select Network Setup or Security Setup.
For information about the Reset Settings menu, see
Note
195.
Step 5 Enter your password then click Sign-In.
Step 6 Perform one of these actions to display the desired menu:
• Use the navigation arrows to select the desired menu and then press Select.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 7
To display a submenu, repeat step 5.
Step 8
To exit a menu, press Exit or the back arrow .
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
.
Set Up Phone From Setup Menus
Maintenance, on page
37