Cisco 7821 Administration Manual page 42

Cisco IP Phone 7861
5 Conference button
6
Hold/Resume button
7 Navigation and Select
button
8 Programmable feature
buttons
9 Headset button
10 Speakerphone button
11 Keypad
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
28
Creates a conference call.
Places an active call on hold and resumes the held call.
The Navigation and Select button allows you to scroll through menus,
highlight items and select the highlighted item.
Depending on how your system administrator sets up the phone,
programmable feature buttons provide access to:
• Phone lines and intercom lines
• Speed-dial numbers (speed-dial buttons, including the Line Status
speed-dial features)
• Web-based services (for example, a Personal Address Book button)
• Call features (for example, a Privacy button)
Buttons illuminate to indicate status:
• Green, steady: Active call or two-way intercom call
• Green, flashing: Held call
• Amber, steady: Privacy in use, one-way intercom call, DND active,
or logged into Hunt Group
• Amber, flashing: Incoming call or reverting call
• Red, steady: Remote line in use (shared line or Line Status)
• Red, flashing: Remote line on hold
Toggles the headset on or off. When the headset is on, the button is lit.
Toggles the speakerphone on or off. When the speakerphone is on, the button
is lit.
Allows you to dial phone numbers, enter letters, and select menu items (by
entering the item number).