Set Up Call Forward Notification - Cisco 7821 Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose one of the following windows:
• Device > Device Settings > Common Phone Profile
• Device > Phone > Phone Configuration
Note
Step 2 Select the appropriate phones.
Step 3 Scroll to the Product Specific Configuration Layout pane and select Enable from the SSH Access drop-down
list box.
Step 4 Select Save.

Set Up Call Forward Notification

You can control the call forward settings.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2
Locate the phone to be set up.
Step 3 Configure the Call Forward Notification fields.
Table 14: Call Forward Notification fields
Field
Caller Name
Caller Number
Redirected Number
If you set the parameter in both windows, the setting in the Device > Phone > Common Phone
Profile window takes precedence.
Description
When this check box is checked, the caller name displays in the notification
window.
By default, this check box is checked.
When this check box is checked, the caller number displays in the notification
window.
By default, this check box is not checked.
When this check box is checked, the information about the caller who last
forwarded the call displays in the notification window.
Example: If Caller A calls B, but B has forwarded all calls to C and C has
forwarded all calls to D, the notification box that D sees contains the phone
information for caller C.
By default, this check box is not checked.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Set Up Call Forward Notification
123