Set Up Idle Display - Cisco 7821 Administration Manual

Set Up Idle Display

Set Up Idle Display
You can specify an idle display (text only; text file size should not exceed 1M bytes) that appears on the phone
screen. The idle display is an XML service that the phone invokes when the phone is idle (not in use) for a
designated period and no feature menu is open.
For detailed instructions about creating and displaying the idle display, see Creating Idle URL Graphics on
Cisco IP Phone at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml
In addition, see the Cisco Unified Communications Manager Administration Guide or the Cisco Unified
Communications Manager Bulk Administration Guide for the following information:
• Specifying the URL of the idle display XML service:
• Specifying the length of time that the phone is not used before the idle display XML service is invoked:
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Settings > Device Configuration
Step 2 In the Idle URL field, enter the URL to the idle display XML Service.
Step 3
In the Idle URL Timer field, enter the time that the idle phone waits before displaying the idle display XML
service.
Step 4 Select Save.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
90
◦ For a single phone: Idle field in the Phone Configuration window in Cisco Unified Communications
Manager Administration.
◦ For multiple phones simultaneously: URL Idle field in the Enterprise Parameters Configuration
window, or the Idle field in the Bulk Administration Tool (BAT)
◦ For a single phone: Idle Timer field in the Phone configuration window in Cisco Unified
Communications Manager Administration.
◦ For multiple phones simultaneously: URL Idle Time field in the Enterprise Parameters Configuration
window, or the Idle Timer field in the Bulk Administration Tool (BAT)