Cisco 7821 Administration Manual page 61

Step 7 Configure a security profile for the device type and protocol. Select System > Security > Phone Security
Profile.
For more information, see the "Phone security profile setup" chapter in the Cisco Unified Communications
Manager Security Guide.
Step 8
Set up the phone. Select Device > Phone.
a) Locate the phone you want to modify or add a new phone.
b) Configure the phone by completing the required fields in the Device Information pane of the Phone
Configuration window.
• MAC Address (required): Make sure that the value comprises 12 hexadecimal characters.
• Description: Enter a useful description to help you if you need to search on information about this
user.
• Device Pool (required)
• Phone Button Template: The phone button template determines the configuration of buttons on a
phone.
• Common Phone Profile
• Calling Search Space
• Location
• Owner User ID
The device with its default settings is added to the Cisco Unified Communications Manager database.
For information about Product Specific Configuration fields, see the "?" Button Help in the Phone
Configuration window.
Note If you want to add both the phone and user to the Cisco Unified Communications Manager
database at the same time, see "End user phone addition" chapter in the Cisco Communications
Manager Administration Guide.
c) In the Protocol Specific Information area of this window, choose a Device Security Profile and set the
security mode.
Note Choose a security profile based on the overall security strategy of the company. If the phone does
not support security, choose a nonsecure profile.
d) In the Extension Information area, check the Enable Extension Mobility check box if this phone supports
Cisco Extension Mobility.
e) Click Save.
Step 9 Select Device > Phone to configure directory numbers (lines) on the phone by completing the required fields
in the Directory Number Configuration window.
a) Find the phone.
b) In the Phone Configuration window, click Line 1 on the left pane of the window.
c) In the Directory Number field, enter a valid number that can be dialed.
This field should contain the same number that appears in the Telephone Number field in the End
Note
User Configuration window.
d) From the Route Partition drop-down list, choose the partition to which the directory number belongs. If
you do not want to restrict access to the directory number, choose <None> for the partition.
e) From the Calling Search Space drop-down list, choose the appropriate calling search space. The value that
you choose applies to all devices that are using this directory number.
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Set Up Cisco IP Phone
47