Cisco 7821 Administration Manual page 186

Cisco IP Phone Web Page
To display a Streaming Statistics area, access the web page for the phone, and then click a Stream hyperlink.
The following table describes the items in the Streaming Statistics areas.
Table 25: Streaming Statistics area items
Item
Remote Address
Local Address
Start Time
Stream Status
Host Name
Sender Packets
Sender Octets
Sender Codec
Sender Reports Sent
(see note)
Sender Report Time Sent
(see note)
Rcvr Lost Packets
Avg Jitter
Rcvr Codec
Rcvr Reports Sent
(see note)
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
172
Description
IP address and UDP port of the destination of the stream.
IP address and UPD port of the phone.
Internal time stamp indicates when Cisco Unified Communications Manager
requested that the phone start transmitting packets.
Indication of whether streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Total number of RTP data packets that the phone transmitted since it started
this connection. The value is 0 if the connection is set to receive-only mode.
Total number of payload octets that the phone transmitted in RTP data packets
since it started this connection. The value is 0 if the connection is set to
receive-only mode.
Type of audio encoding that is for the transmitted stream.
Number of times the RTCP Sender Report has been sent.
Internal time-stamp indication as to when the last RTCP Sender Report was
sent.
Total number of RTP data packets that have been lost since data reception started
on this connection. Defined as the number of expected packets less the number
of packets actually received, where the number of received packets includes any
that are late or are duplicates. The value displays as 0 if the connection was set
to send-only mode.
Estimate of mean deviation of the RTP data packet interarrival time, measured
in milliseconds. The value displays as 0 if the connection was set to send-only
mode.
Type of audio encoding that is used for the received stream.
Number of times the RTCP Receiver Reports have been sent.